|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
ELECTRICAL ADJUSTMENT MAIN C.B
2
1 R/P HEAD
PRACTICAL SERVICE FIGURE
1. Azimuth Adjustment Settings: � Test tape: TTA-330 � Test point: EARPHONE JACK (J102) � Adjustment location: Azimuth adjustment screw � PAUSE: OFF � VOLUME: Maximum. � PLAYBACK SPEED: Normal (Speed volume center) Playback the test tape, and adjust so that the output (8 kHz) becomes maximum. 2. Tape Speed Adjustment Settings: � Test tape: TTA-100 (TAPE CENTER) � Test point: EARPHONE JACK (J102) � Adjustment location: VR102 � PAUSE: OFF � VOLUME: Maximum � PLAYBACK SPEED: Normal Method: (Speed volume center) Playback the test tape, and adjust for 3000 Hz ±10Hz Tape speed: Wow & flutter: Take-up torque: F.F torque: REW torque: S/N ratio: (Vol: Max - 10 dB) Distortion: (Vol: Max - 10 dB) Noise level: (Vol: Max) Erasing ratio: Test tape 3000 Hz ± 60 Hz Less than 0.55% 20 ~ 50 g-cm (FWD) More than 55 g-cm More than 55 g-cm More than 45 dB (PB) More than 25 dB (R/PB) Less than 3.0% (PB) Less than 5.0% (R/PB) Less than 5.0 mV (PB) Less than 16 mV (R/PB) More than 28 dB (1kHz, 50dB) TTA-100 TTA-330
Method:
13
|
|
|
> |
|
