I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Text excerpt from page 64 (click to view)
Routing - Main Inputs
This section is for assigning the inputs of the ScratchAmp to the functions of the software. Usually Deck A is connected to IN1 and OUT1 and Deck B is connected to IN2 and OUT2.
Single Turntable Mode
If assigning both decks to the same ScratchAmp Input, the software runs in "Single Turntable� mode. You can now control each deck with the same turntable. This can be useful in case one of the turntables has a defect.
Routing - Main Outputs
In this section you can swap Out 1 and Out 2 of the ScratchAmp from within the software to switch the assignment of the decks to the channels of your mixer without switching the cables.
Routing - Headphones
Here you can set which signal should be rerouted to the headphone outputs of the ScratchAmp. You have the choice to monitor either input of the ScratchAmp (IN1, IN2, AUX/MIC IN) or to monitor any of the decks (DECKA, DECKB, PREVIEW). Note: If you are traveling and running TRAKTOR FS 2 without connecting the ScratchAmp, the sound of the Preview Player in the "List" window will be routed to the onboard soundcard of your computer. This allows you to prelisten and sort playlists without connecting to the ScratchAmp.
