|
There are currently no product reviews.
 ;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
Door Reversibility / Child Safety Lock
Door Reversibility
A. Unplug the dryer. B. Open the door. C. Using a spanner, turn the contact pin in the upper part of the door by 90° and remove it. D. Unscrew the 2 screws of the door hinge and remove the door. E. Removing the door lock: Unscrew the 2 screws above and below the door lock system. Lift the door lock from the bottom, sliding it upwards about 1,5 cm and remove it. F. Reverse the door: G. Fasten the door on the desired side with the 2 screws. H. Insert the door lock system on the opposite side of the hinge fixation and push it down 1.5 cm. I. Fix the 2 screws above and below the door lock system. J. Take care not to reverse the sense of the door lock system. The child safety must be above the locking mechanism. K. Replace the contact pin in the inside of the door (top).
Child Safety Lock
How to use the child safety lock
1. Open the door. 2. Using a coin or a screwdriver, turn the plastic screw (J) clockwise 90°. Slot vertical: the door cannot be locked. Slot horizontal: the door can be locked.
C
C
D
E J
E
41
|
