|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
 ;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
1-2-23 Plate Ground Deck, Cylinder Ass�y Removal
1) Remove the 3 Screws �. 2) Lift the Plate Ground Deck ´. 3) Lift the Cylinder Ass�y �. Assembly : 1) Match the 3 holes in the bottom of Cylinder ass'y � to the 3 holes of Main Base as attending not to drop or knock the Cylinder ass'y �. 2) Tighten the 1 Screw �. 3) Match the Plate Ground Deck ´ to the Hole of Base Main. 4) Tighten the other 2 Screws �.
1-2-24 Belt Pulley Removal
1) Remove the Belt Pulley �. Note : Take extreme care not to get grease on Belt Pulley � at assembling or reassembling.
� BELT PULLEY
Note : 1) Take care not to touch the Cylinder Ass'y � and the tape guide post at reinstalling. 2) When reinstalling, Don't push down too much on Screw Driver.
� 3 SCREWS
Fig. 1-30 Belt Pulley Removal
´ PLATE GROUND DECK
1-2-25 Level Head Cleaner Ass�y Removal
1) Release the Hook �. 2) Lift the Lever Head Cleaner Ass�y ´.
´ LEVER HEAD CLEANER ASS'Y
� HOOK
SLEEVE-HEAD CLEANER
� CYLINDER ASS'Y
Fig. 1-29 Plate Ground Deck, Cylinder Ass�y Removal
Fig. 1-31 Level Head Cleaner Ass�y Removal
� 17 �
|
|
|
> |
|
