|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It took about 24-hours after my payment before I was able to get to the download. Apparently, payment processing is not 100% automated. That is no big deal, just be aware of that going in.
After I got to it, it was in good shape, easy to read, etc. Not some cheap FAX copy looking thing.
Also, this site was the cheapest I found. Another Plus!
 ;
Good price, very legible manual, exactly what I needed -- but had to wait a day to actually get the download of the manual. Would have preferred to download it immediately after payment rather than waiting for someone to "process" my order. I was surprised that I had to wait that long.
;
As the only source for this manual it rather rank quite high since it is well scanned and perfectly readable.
;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
3 TUNER Either a PLL or a VST tuner is used as a tuner. UV1316 (VHF/UHF) is used as a PLL tuner. For only PALM/N, NTSC M applications UV 1336 is used as the PLL tuner. UV 1 3 1 5 (VHF/UHF) is used as a VST Tuner. Channel coverage of UV1316: OFF-AIR CHANNELS CABLE CHANNELS CHANNELS S01to S08 S09 to S38 S39 to S41 FREQUENCY RANGE (MHz) 69.25to154.25 161.25to439.25 447.25 to 463.25
BAND
Low Band Mid Band High Band
CHANNELS E2toC E5 to E12 E21 to E69
FREQUENCY RANGE (MHz) 48.25 to 82.25(1) 175.25to224.25 471.25 to 855.25 (2)
(1). Enough margin is available to tune down to 45.25 MHz. (2). Enough margin is available to tune up to 863.25 MHz. Noise Low band Mid band High band Typical 5dB 5dB 6dB Max. 9dB 9dB 9dB Gain All channels Gain Taper (of-air channels) Min. Typical Max. :38dB 44dB 52dB : 8dB
Channel Coverage UV1336:
BAND
Low Band Mid Band
CHANNELS 2toD E toPP QQQ to 69
FREQUENCY RANGE (MHz) 55.25to139.25 145.25to391.25 397.25to801.25
High Band
Noise is typically 6dB for all channels. Gain is minimum 38dB and maximum 50dB for all channels. Channel Coverage of UV1315: OFF-AIR CHANNELS CABLE CHANNELS CHANNELS S01to S08 S11 to S39 S40 to S41 FREQUENCY RANGE (MHz) 69.25 to 168.25 231.25to447.25 455.25 to 463.25
BAND Low Band Mid Band High Band
CHANNELS E2toC E5 to E12 E21 to E69
FREQUENCY RANGE (MHz) 48.25 to 82.25(1) 175.25to224.25 471.25 to 855.25 (2)
(1). Enough margin is available to tune down to 45.25 MHz. (2). Enough margin is available to tune up to 863.25 MHz. Noise Low band Mid band High band Typ. 6dB 6dB 6dB Max. 9dB 10dB 11dB Gain All Channels Gain Taper (off-air channels) Min. 38dB Typ. 44dB Max. 50dB 8dB
4 SOUND OUTPUT STAGE TDA2822 TDA2822 is used as the AF output amplifier. It is supplied by +12VDC coming from a separate winding in the SMPS transformer. An output power of 3W(THD=10%) can be delivered into an 16 ohm load. 5 VERTICAL OUTPUT STAGE WITH TDA8174A TheTDA8174Aisa power amplifier circuit for use in 90° and 1 1 0 ° colour deflection systems for 25 to 200 Hz field frequencies, and for 4 : 3 and 1 6 : 9 picture tubes. 6 POWER SUPPLY (SMPS) The DC voltages required at various parts of the chassis are provided by an SMPS transformer controlled by the 1C UC3842/ 3 which is designed for driving, controlling and protecting switching transistor of SMPS. The transformer produces 1 1 5 V for FBT input, ±12V for audio output 1C, S+5V and 8V for ST92195. 7 DISCRETE VIDEO AMPLIFIER Three high voltage, high frequency transistor is used for RGB amplifier. This application works on fixed AC and DC gains.
|
|
|
> |
|
