I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
I was impressed with the quality of service (frequent e-mails to let you know the status of your order), and the speed at which the download became available. The manual was a life saver and was not easy to track down. Thank you for such an excellent service.
the manual was just what i wanted it had all the revelent information required to operate the hifi .Iwould use any manual i downloaded for any item which needs a manual
Die gewünschte Bedienungsanleitung wurde vereinbarungsgemäß in deutsch bereitgestellt. Sie ist gut lesbar. Kein Kauderwelsch.
Danke für den Service.
Text excerpt from page 11 (click to view)
English
E M P T Y I N G T H E D U S T C O M PA RT M E N T / CLEANING THE HOSE AND NOZZLE
Empty the dust compartment after each vacuuming or as necessary. For best results it is recommended that the dust compartment is emptied regularly.
1 2 3 1 Press the locking catch and remove the dust compartment. 2 Remove the filter holder from the dust compartment by pressing the catch with your thumb. 3 Empty the dust compartment. A useful tip: to prevent dust from escaping, hold a plastic bag securely around the dust compartment and empty the contents into the plastic bag. Wait 30 seconds for the dust to settle before removing and sealing the plastic bag. Clean and dry the dust compartment if necessary. Remove any particles from the Cyclone cone. 4 Replace the filter holder and ensure that it sits properly. 5 Insert the dust compartment front side first, as shown in the picture, until the catch clicks to engage. Do not try to close with force.
4
5
6
The vacuum cleaner stops automatically if a blockage occurs in the nozzle, tube, hose or the filters or Cyclone cone become blocked with dirt. In such cases, disconnect from the mains and allow the cleaner to cool for 30 minutes. Remove the blockage and/or clean the filters, and then restart the vacuum cleaner.
6 Use a cleaning strip or similar to clear the tubes and hose. 7 It may also be possible to remove the obstruction in the hose by squeezing the hose. Be careful however in case the obstruction is caused by glass or needles caught inside the hose.
Note.The warranty does not cover any damage to hose caused by cleaning it.
8 To avoid deterioration of the carpet/hard floor nozzle clean it as often as possible. The easiest way to clean it is by using the hose handle. Cleaning the turbo nozzle 9 Disconnect the vacuum cleaner from the mains, and remove entangled threads etc. by snipping them away with scissors. Use the hose handle to clean the nozzle.
