|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
ALIGNMENT SETTINGS:
(The figures below are nominal and used for representative purposes only.) 1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV into the Service Mode. 2. Press the RED / GREEN buttons to step up / down through the functions. 3. Press the YELLOW / BLUE buttons to alter the function values. 4. Press the STR button after each adjustment has been made to store the required values. 5. To exit the Service Mode, press the "N" button. Alignment Function Settings / Special features Horizontal Position H-Pos +020 Optimum setting.
Vertical Position
V-Pos +024
Optimum setting.
Horizontal Amplitude
H-Amp +049
Optimum setting.
Vert. Amplitude
V-Amp +029
Optimum setting.
EW-amplitude
E/W-Amp1 +022
Optimum setting.
EW-amplitude
E/W-Amp2 +000
Optimum setting.
Trapezium-comp
Trapez-1 +033
Optimum setting.
Horizontal-Parallel
H-Parallel +032
Optimum setting.
Vertical Linearity
V-Lin +004
Optimum setting.
DVCO
DVCO 000
Receive a PAL Colour Bar Pattern. For DVCO alignment press "Blue" button, wait until the colours are stable and press "STR". To adjust Cutoff adjust the screen VR until the display shows "O.K." Contrast Maximum A.I. Off Adjust for optimum setting.
Cut-off DC
Cut-off O.K.
Highlight
High
0031 0031 0031
Sub-Brightness
Sub-Brightness 000
Optimum setting.
7
|
|
|
> |
|
