Thank you very much for this Service Manual, it helped us a lot to repair the M-4318!
...BUT: The parts list is missing and the free parts katalog on web isn't complete, so now we don't know the part numbers of the defect parts :(
We had to build them out of a working machine, and need the numbers to reorder the missing parts now.
Complete original Service Manual in good (scan) quality!
Text excerpt from page 8 (click to view)
2.3. HOW TO MOVE THE CHASSIS INTO SERVICE POSITION 1. Hold and lift the rear of the chassis and gently pull the chassis towards you as shown in Fig. 3 2. Release the respective wiring clips and draw out main chassis. 3. After servicing replace the bead clamper and ensure all wiring is returned to its original position before returning the receiver to the customer.
Fig. 3.
2.4. Service Position for DG-Board
Note: Extension cable kit for DG Board is supplied as service fixtures and tools. (Part No. TZSC07024)
3. Self Check
1. Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.
2. To get into the Self-Check mode, press the down n (-/ ) button on the customer controls at the front of the set, at the same time pressing the HELP button on the remote control and the