|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Zone 2�Continued
Setting the Powered Zone 2
To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS terminals so that they produce sound when Zone 2 is used.
ENTER
3
Use the Up and Down [ ]/[ ] buttons to select �g. Powered Zone 2,� and use the Left and Right [ ]/[ ] buttons to select:
1 2 2, 3 1, 4
Not Activated: Zone 2 SPEAKERS terminals deactivated. Activated: Zone 2 SPEAKERS terminals activated. When Zone 2 is activated and turned on (see page 76), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers connected to the SURROUND BACK SPEAKERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal).
1
RECEIVER
Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen.
4
Press the [SETUP] button. The setup menu closes.
2
ENTER
Use the Up and Down [ ]/[ ] buttons to select �0. Initial Setup,� and then press [ENTER]. The Initial Setup menu appears.
Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
ENTER
75
|
|
|
> |
|
