|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great and very well scanned Service Manual, also very fast download - Recomended !
;
I'm quite impressed. I had to wait 24 hours for my manual (quite a rare one) but I got it and the quality was good. Also, from trawling the web, these prices are by far the best.
;
Manuale perfetto. Ottimo e utilissimo. Grazie a questo manuale ho potuto realmente risolvere il complesso problema della stampante.
;
Manuale perfetto. Ottimo e utilissimo. Grazie a questo manuale ho potuto realmente risolvere il complesso problema della stampante.
 ;
Was very fast and accurate service. Just what I needed. I recommend to everyone.
ALIGNMENT SETTINGS:
(The figures below are nominal and used for representative purposes only.) 1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV into the Service Mode. 2. Press the RED / GREEN buttons to step up / down through the functions. 3. Press the YELLOW / BLUE buttons to alter the function values. 4. Press the STR button after each adjustment has been made to store the required values. 5. To exit the Service Mode, press the "N" button. Alignment Function Settings / Special features Horizontal Position H-Pos +020 Optimum setting.
Vertical Position
V-Pos +024
Optimum setting.
Horizontal Amplitude
H-Amp +049
Optimum setting.
Vert. Amplitude
V-Amp +029
Optimum setting.
EW-amplitude
E/W-Amp1 +022
Optimum setting.
EW-amplitude
E/W-Amp2 +000
Optimum setting.
Trapezium-comp
Trapez-1 +033
Optimum setting.
Horizontal-Parallel
H-Parallel +032
Optimum setting.
Vertical Linearity
V-Lin +004
Optimum setting.
DVCO
DVCO 000
Receive a PAL Colour Bar Pattern. For DVCO alignment press "Blue" button, wait until the colours are stable and press "STR". To adjust Cutoff adjust the screen VR until the display shows "O.K."
Cut-off DC
Cut-off O.K.
Highlight
High
0031 0031 0031
Optimum setting.
Sub-Brightness
Sub-Brightness 000
Optimum setting.
9
|
|
|
> |
|
