|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual is actually a pack of schematics, good quality pictures.
 ;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
 ;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
 ;
Excelent service, the manual is complete, very cheap and fast
Alberto
ALIGNMENT SETTINGS:
(The figures below are nominal and used for representative purposes only.) 1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v) on the customer controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV into the Service Mode. 2. Press the RED / GREEN buttons to step up / down through the functions. 3. Press the YELLOW / BLUE buttons to alter the function values. 4. Press the STR button after each adjustment has been made to store the required values. 5. To exit the Service Mode, press the "N" button. Alignment Function Settings / Special features Horizontal Position H-Pos +020 Optimum setting.
Vertical Position
V-Pos +024
Optimum setting.
Horizontal Amplitude
H-Amp +049
Optimum setting.
Vert. Amplitude
V-Amp +029
Optimum setting.
EW-amplitude
E/W-Amp1 +022
Optimum setting.
EW-amplitude
E/W-Amp2 +000
Optimum setting.
Trapezium-comp
Trapez-1 +033
Optimum setting.
Horizontal-Parallel
H-Parallel +032
Optimum setting.
Vertical Linearity
V-Lin +004
Optimum setting.
DVCO
DVCO 000
Receive a PAL Colour Bar Pattern. For DVCO alignment press "Blue" button, wait until the colours are stable and press "STR". To adjust Cutoff adjust the screen VR until the display shows "O.K."
Cut-off DC
Cut-off O.K.
Highlight
High
0031 0031 0031
Optimum setting.
Sub-Brightness
Sub-Brightness 000
Optimum setting.
9
|
|
 |
> |
|