|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Was very fast and accurate service. Just what I needed. I recommend to everyone.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
5.18
PIN-code, English
PIN-code deactivated by customer prior to service With the PIN-code deactivated prior to service you must be aware of the modules will be registered to the product in the following situations : - the product has been connected to the mains for more than 12 hours, including Standby time. - the PIN-code is activated or deactivated. The registration of modules in the product can only be changed at Bang & Olufsen, Struer. Activate the PIN-code Select the TV SETUP menu. Press l twice and then STOP to bring up the PINCODE SETUP menu. Enter the 4 digit Pin-code. Re-enter the code to confirm it and press GO. If you want to change or delete the PIN-code, enter the correct PIN-code and press GO. It is now possible to change the PIN-code or delete the PIN-code. Enter the PIN-code If the PIN-code is activated and the TV is disconnected from the mains for more than15-30 minutes, a PINCODE menu appears as soon as the TV is switched on. Enter the PIN-code, and the TV starts again. If the PIN-code has been forgotten If the PIN-code has been forgotten (5 tries within 3 hours with the mains connected), the only way to unlock the TV again is by entering a 5 digit Master-code. The Master-code is ordered by sending a request either via the Retail System or on the Master-code formula. If non of these options are available please contact Bang & Olufsen. When the TV prompts for a PIN-code, press and hold l down to bring up the MASTERCODE menu. Enter the Master-code and press GO. This will deactivate the PIN-code and reactivate the TV.
|
|
|
> |
|
