|
Who's Online
There currently are 5878 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Good site, works ok and you get what you order, no problems experienced, got my manual within a day. A++++
;
Original well scanned manual. Got the job done. Microwave problem found & corrected. For $5 and a new magnitron from ebay, it was a cheap and good the first shot fix. Electrical schematics allowed me to mage sure every thing else was ok before cutting and order for parts. Hard to live without.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
1.4
How to service, English
Troubleshooting
Before troubleshooting is started Please ask the customer to demonstrate or explain the fault. Check that The product is set for the correct option All leads are connected correctly Mains voltage is applied All external sources are connected correctly and the product setup is correct Set up for test Connect the following products to establish the setup for test, The BeoVision 4, a BeoSystem 1 and a DVD player.
BeoVision 4
DVD player BeoSystem 1
�����
�����
Default settings when using the Fault flow chart - Press TV on Beo4 - Select a TV channel with picture and sound Service mode on PDP If BeoVision 4 is connected to BeoSystem 1 please unplug the SERIAL connector (RS232). Otherwise it is not possible to enter the service mode. Switch off the PDP by pressing the A button. Be sure that there is no light coming from the LED. Wait 10 seconds. Switch on the PDP. The LED should be green.
|
|
|
> |
|