|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
 ;
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
;
I am happy to get a rare TECHNICS SH-9090 Owner's Manual by PDF in clear copy.
Programming the Remote Control
Programming Without Code
If you cannot find the right Code, you can call up all Codes one after the other to search for a Code. 1.Turn on the power for the Component to be programmed. 2.Press the mode button (TV, VCR or AUX) for the component to be programmed, and then press the Setup button and hold for 3 seconds (until the visible LED blinks twice). 3.Use the numeric buttons on the remote control to enter �991�. After this number is entered, the LED on the remote control will flash twice. 4.Press the POWER button. (A remote control signal will be transmitted.) 5.If the component turns off, go to step 6. If the component remains on, press the mode button (TV, VCR or AUX), and then repeat step 4. (Repeat this step until the right Code is found.) 6.Press the Setup button to register the Code. When programming is complete, the LED on the remote control will flash twice.
POWER button AUX button VCR button LED TV button
Identifying programmed Codes
If you would like to know what Code has been programmed, you can find out by observing the flashing pattern of the remote control LED. 1.Press the mode button (TV, VCR or AUX) for the component that you would like to find out the Code for, and then press the Setup button and hold for 3 seconds (until the visible LED blinks twice). 2.Use the numeric buttons on the remote control to enter �990�. After this number is entered, the LED on the remote control will flash twice. 3.When a �1� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the first digit of the Code. For example, if the LED flashes five times, the first digit of the Code is 5. 4.When a �2� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the second digit of the Code. 5.When a �3� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the third digit of the Code. 6.When a �4� is then entered using the numeric buttons, the remote control LED will flash. The number of times it flashes corresponds to the fourth digit of the Code. 7.Write the code numbers for your components in the space provided below. This will serve as a reference when you need to program your remote control. Setup button
Name of component
Numeric buttons
TV VCR AUX
(
TV
)
( VCR , DVD player ) ( )
18
|
|
|
> |
|
