|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
;
Manual was complete and available promptly, since I had lost my original manual. Very good response.
;
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
;
excellent quality, contains circuits and scan quality, 110 pages
;
It was easy done, and I got exactly what I was looking for.
Door reversal
Before starting work, unplug the appliance. To reverse the opening direction of the door, proceed as follows: 1. Pull off the ventilation grille (D), which is a clip-on fit. Remove the bottom hinge (E) by unscrewing its two fixing screws. 2. Remove the plugs (G) and fit them on the opposite side. 3. Remove the door (4). 4. Unscrew pin (2) and screw it onto the opposite side. 5. Refit the door. 6. Refit the bottom hinge on the opposite side using the two screws previously removed. 7. Slide the hole cover (F) off the ventilation grille (D) and fit it on the opposite side. 8. Refit the ventilation grille, clipping it into place. 9. Remove the clip-in screw covers, then move the handle to the opposite side. Holes which are not used must be masked with the plastic plugs previously removed from the opposite side. Warning! If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Inner door reversal
1. Using a screwdriver release bracket (1) by pressing on the internal spring (Fig.) and withdraw it from its seat together with the door; 2. remove plug (2) and fit it in the hole left open on the opposite side; 3. turn the door through 180°, remove the bracket (1) and refit it on the opposite side. 4. Refit the door and insert the top pin and bottom bracket (1), pushing it into place. To ensure correct storage of food, the door is fitted with a simple spring device which holds it in the open position until it is properly closed.
180°
2 1
PR140
22
|
|
|
> |
|
