|
There are currently no product reviews.
 ;
I must admit, I was very skeptical... $4.99 for a 74 page service manual. I've seen some very poorly scanned manuals on the Internet, but this one is VERY good quality! Even when zooming into 500%. Great Deal!
;
Very good detail, Quick service response. A useful service manual with all details. I recomend this service.
;
As Always you can find here manuals even of difficult TV scheme which are scan in almost perfect way.clear and fast!!!!!
Great work thanks!
;
Incredibly clear!!!! Well done, complete and wonderful. It could not better than this!!!!
 ;
Thank You for fast delivery for the sheme.
Everything allright.
Thanks & best regards Franz
5-2. PRINT IS TOO DARK OR TOO LIGHT
START
Is voltage (approx. 5.7 V) at pin 4 of IC6 on MA-91 board output when "CONTRAST"is set as center value?
NO
IC203 and IC201 or peripheral circuit of Q16 on MA-91 board are defective.
YES
Is voltage (approx. 1.4 V) at pin 6 of IC6 on MA-91 board output when "BRIGHT" is set as center value?
NO
Peripheral circuits IC203 and IC201 or Q15 and Q17 on MA-91 board are defective.
YES
Is voltage (approx. 1.5 to 2.5 V) available atpin 78 of IC505 on MA-91 board when head is at the normal temperature? YES
NO
Peripheral circuit IC404 and pins 15 and 16 of CN202 line on MA-91 board, or the thermistor in the head are defective.
Are the required voltages available at each terminal, 3 V at 19 pin of IC6 and IC7 on MA-91 board, and 1 V at 23 pin of the IC's? YES
NO
Peripheral circuit Q21 on MA-91 board is defective.
Is density of stair step printed in test mode properly?
NO
The head voltage or connecetor CN202 line on MA-91 board is defective.
YES
The data buses of IC7 and IC8, data buses of IC602 and IC603, or peripheral circuit IC2 on MA-91 board are defective.
5-2
UP-980(UC) UP-980CE(CE)
|
