TOSHIBA V641UK
Owner's Manual

RECORDING

�� ¥� OK

END: MENU

�� ¥� DELETE:CLR/RST

MENU
AUDIO

6
OK

3
COUNT.RST F.ADV CLR/RST

Press the � or � buttons to select the required programme. Press the ¥ or � button to select and change any values as required. For more details, refer to the previous page. On completion, press. MENU.

4 5 1

A smooth edited scene will only be achieved if there are of the same video system.

7 8 1

Press the PAUSE/STILL (��) button to start recording.

When you have finished recording, press STOP (s).

Recording from Another VTR or Camcorder
Connect the VTR, from which the cassette is to be copied, to the appropriate SCART audio and video input connectors on the rear of your VTR. Insert a blank cassette in your VTR.
ON/STANDBY EJECT

Cancelling a Preset Recording
COUNT.RST

Press MENU on the remote control. Result : The programming menu is displayed.

F.ADV

CLR/RST

CURSOR

2
OK
VIDEO Plus+
AUDIO

Press the OK button to select this option . Result : The TIMER PROGRAMMING menu is displayed.
PROG 1/JAN MON 21:28 PR DAY START�STOP V/P 1 MO 1 12:00�12:50 SP ON -- ---- --:--�--:---- -- ---- --:--�--:---- -- ---- --:--�--:---- -- ---- --:--�--:---- -- ---- --:--�--:---- �� ¥� DELETE:CLR/RST MENU

2
CURSOR

CHANNEL

REC

REW

PLAY

FF

STOP

PROG

OPTIONS

INSTALL

Insert the pre-recorded cassette in the other video source (VTR or

CLOCK

BONUS

LANG

3
camcorder).
OK

TIMER PROGRAMMING
�� ¥� OK

END: MENU

You can copy a cassette to your VTR from another video source, such as another VTR or a camcorder. Note : It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them any from without the permission of the owners of the corresponding copyright.

AUDIO

4 5 6 7

Press the I.SELECT button to select the appropriate input on your VTR : o AV1 or AV2 for the SCART input. Start playing back the cassette to be copied. Press the two REC buttons to start recording on your VTR. When you have finished recording, press STOP (s) on both VTRs.

You can cancel any programmes that are : o Incorrect o No longer required

3 4 5

Select the programme to be cancelled by pressing the � or � button. Press the CLR/RST button to cancel the selected programme. Result : All the recording information is deleted and the broadcast will not be recorded. On completion, press. MENU.

30

31

RECORDING

2-14 Toshiba
66

Reference Information

RECORDING

66

RECORDING

Checking a Preset Recording
You can check your preset recordings: o When you have finished presetting the VTR o If you have forgotten which programmes will be recorded o Before the VTR enters the timer standby mode

Advance Recording Feature
This function allows you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

Using the Assemble Edit Function

Checking a Preset Recording

1 1 2
Press MENU on the remote control. Result : The programming menu is displayed. Press the OK button to select this option . Result : The TIMER PROGRAMMING menu is displayed.
PROG

Insert the cassette to be edited in your VTR. Press the PLAY (�) button to start playback. When you reach the position from which you wish to start the new recording , press the PAUSE/STILL (��) button. Press the F.ADV button as often as necessary to advance frame by frame, until the exact recording position is located. While the VTR is in still mode, press the two REC buttons to activate the assemble Edit function. Select the source from which you wish to record by pressing: o The CH (i or j) buttons for television channels. o The I.SELECT button for the AV1 or AV2 input sources.

2
F.ADV COUNT.RST CLR/RST

3 4

DISPLAY
PROG

OPTIONS

INSTALL

CLOCK

BONUS

LANG

TIMER PROGRAMMING

PR 1 ------

DAY MO 1 ----------------

1/JAN MON 21:28 START�STOP V/P 12:00�12:50 SP ON --:--�--:---- --:--�--:---- --:--�--:---- --:--�--:---- --:--�--:---- -

5
CURSOR