|
There are currently no product reviews.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
13. CCD White point Defect Detect Adjustment [Adjustment method] � Double-click on the DscCalDi128.
VAA11801-R.3578.A
� Select the CCD Defect from Test menu of Calibration Soft and click the OK. Refer to FIG-1. � After adjustment, An adjustment value will appear on the screen. Refer to FIG-2.
<FIG-2> CCD Defect
<FIG-1>
CCD Black
14. CCD Black point Defect Detect Adjustment [Note] When setting the camera in place, set it to an angle so that nothing appears in any part of the color viewer except the white section. (Do not enter any light.) [Adjustment method]�� ·Double-click on the DscCalDi128. ·Select the CCD Black from Test menu of Calibration Soft and click the OK. Refer to FIG-1. ·After adjustment, An adjustment value will appear on the screen. Refer to FIG-3.
<FIG-3>
������
����������������� ������������
- A17 ï½¥ E5700 -
|
