|
There are currently no product reviews.
 ;
The service manual when downloaded and printed out was clear and easy to read. I would have liked to have been able to enlarge some details, but this was not possible as the file permissions did not allow this. The service was very good. The time taken from placing my order to downloading the document was only a few minutes.
 ;
The manual is useful for trouble shooting for an old instrument. It saved money,and let me enjoy DIY.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Very good scanned copies. Quick response and reasonable price. Thanks for service!
VAA12001-R.3580.A 14. Setting for delivery For the repair parts of the main PCB, the default for setting destination is "Japanese speci�cation" (Japanese/NTSC). When this PCB is replaced, complete the assembly and then carry out setting for delivery according to each destination by pressing [MENU] and cursor button at the same time. [How to set] � Insert a CF card (which does not record any data). � Set the mode dial of camera to "A" and turn on the power. � For each destination, as pressing the following switches, turn off the power. E2000J: [MENU] + [�]: Japanese/NTSC E2000E: [MENU] + [�]: English/NTSC E2000EP: [MENU] + [�]: English/PAL E2000EN: [MENU] + [�]: English/NTSC � Turn on the power again. � Make sure that the remaining quantity is displayed at the lower right on LCD. � Make sure that "Card is not inserted" is displayed by removing the medium. � Turn off the power.
|
