|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
VAA12001-R.3580.A 14. Setting for delivery For the repair parts of the main PCB, the default for setting destination is "Japanese speci�cation" (Japanese/NTSC). When this PCB is replaced, complete the assembly and then carry out setting for delivery according to each destination by pressing [MENU] and cursor button at the same time. [How to set] � Insert a CF card (which does not record any data). � Set the mode dial of camera to "A" and turn on the power. � For each destination, as pressing the following switches, turn off the power. E2000J: [MENU] + [�]: Japanese/NTSC E2000E: [MENU] + [�]: English/NTSC E2000EP: [MENU] + [�]: English/PAL E2000EN: [MENU] + [�]: English/NTSC � Turn on the power again. � Make sure that the remaining quantity is displayed at the lower right on LCD. � Make sure that "Card is not inserted" is displayed by removing the medium. � Turn off the power.
|
|
|
> |
|
