|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
 ;
The scan is clear and well readable with very few weaker spots, usually on black background with white letters, but with enough zoom those spots can be read.
Printout is clear, the manual is complete and has all pages scanned.
I would give 5 stars, except that it is not in color, and the schematic and PCB pages are scanned on multiple pages. The document is locked (except printing) so the pages can not be extracted to compose them together for printing on the large plotter
It is worth the price tag.
;
let's say first that i do not need to have a credit for my opinion, i am a retired sparkie and i voluteerd to fix an electronic device for a local "Youthgroup",as no diagram was present i checked the "net" and gambled on this site and paying some fee via PayPall, i was gladly surprised that the manual arrived as was stated, GOOD SHOW, and best wishes, John
VAA12901-R.3594.A CHECK THE PERFORMANCE AND RESOLUTION �Be sure to check when dissemble and repair the lens-barrel
�(1) Check the performance �� Repeat the following performance several times: After tuning the power switch ON and driving the zoom, turn it OFF. � Confirm that there is no abnormal operation by repeating to check the release performance several times. �(2) Check the resolution By photographying the high-definition resolution chart (J63079), confirm that the TV lines are within the standard. � Standard for the TV lines: more than 1100 TV lines in the Center; more than 750 TVs in the 4 corners. (ref.�The resolution is based on the unit of TV lines that are black-and-white strips distinguished in the TV screen.) (a) The camera is set as follows to take photos: Shooting-mode: Auto, Image quality mode: FINE, Image size: 2272, Flash mode: Flash cancel (b) The uneven pattern in luminance of the chart does not affect, but photograph with the luminance (ISO100, 1/15-1/250) by which the aperture is open. (c) Check the zoom position in the order of WIDE, MIDDLE (press the button 6 times starting from WIDE) and TELE. The object distance is WIDE: approx.65cm, MIDDLE: approx.115cm, TELE: approx.185cm. Set the chart fully screened in the LCD of the camera, and fix on a tripod. (d) Open the photographed image by Photoshop, and confirm it by the magnified display, e.g. 100%, etc. (e) Regarding the resolution of the frame center and the 4 corners, check if it is clear in black and white in the position circled in red as shown in the below.
�
�In case either (1) or (2) of the above fails, it is necessary to replace the lens-barrel group unit with the new one.
High-definition resolution chart (J63079) -A6-1 ï½¥ E4300 -
|
|
|
> |
|
