|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Original well scanned manual. Got the job done. Microwave problem found & corrected. For $5 and a new magnitron from ebay, it was a cheap and good the first shot fix. Electrical schematics allowed me to mage sure every thing else was ok before cutting and order for parts. Hard to live without.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
 ;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
NO.22 Hi-Fi TROUBLESHOOTING(2) (Hi-Fi Models) FLOW CHART NO.24 LINEAR SOUND MODE TROUBLESHOOTING (1)
VC-A310X/NZ VC-H725X VC-H730X/NZ
No linear sound recording (E-E mode is possible) No Hi-Fi sound recording(E-E mode is possible)
NO Check the AUDIO MUTE (H) line between pin
Is there "L" level at pin (99) of IC201? (99) IC201 and pin (81) of IC701.
NO Replace IC651. YES
Check peripheral circuit of IC651 as YES shown in table. Is there a signal at pin(4) of IC201? Replace IC201.
L-ch pins(16),(17),(18),(19)
R-ch pins(35),(34),(33),(32) NO
Is the supply voltage 12V fed to pin(2) of Check PC 12V line.
YES YES
YES T601? Check Hi-Fi 5V line.
NO
Is there signal (Bias) at pin (5) of T601? Q603) and FE BIAS CTL line.
of IC651?
NO Is there signal (Bias + Audio sig.) at pin (6)
YES of T601? NO Is the supply voltage of 5V fed to pin(25)
Check the Bias oscillation circuit(T601,Q602,
Is there REC FM signal outputted to the pins(21) (24)(ch-1)/pins(21) to (22)(ch-2)
of IC651 ? YES
YES Check peripheral circuits of T601.
Is there H level at pin(29) of IC651? Check AH-MZ harness.
YES
NO YES
Check the MH-AM harness and A/C head.
Check or replace the cylinder. Check the Hi-Fi CTL (H) line between pin (29) IC651and pin(22) of IC701.
FLOW CHART NO.25 LINEAR SOUND MODE TROUBLESHOOTING (2) YES No linear sound playback (E-E mode is possible) Check the record AGC setting resistor
R678 at pin(37) of IC651.
46
Is there a signal at pin(100) of IC201?
YES YES
Are MH-AA harness and the PB AMP. Replace IC651. NO peripheral parts normal?
FLOW CHART NO.23 Hi-Fi SOUND MODE TROUBLESHOOTING(3) (Hi-Fi Models) Clean A/C Head.
YES
No Hi-Fi sound playback(E-E mode is possible) NO Is the azimuth height of A/C head properly
adjusted?
Replace IC651. YES
YES Replace A/C head.
Readjust azimuth height. Is there playback envelope signal(about NO Is the supply voltage of 5V fed to pin(25) 300mVp-p) outputted to the pins(29),(30) of IC651? NO
of IC651? A-H.SW.P. signal pin(27) Is there "L" level at pin (99) of IC201? YES (99) IC201 and pin (81) of IC701. IC651?
NO
Check the AUDIO MUTE (H) line between pin
YES Check peripheral circuit of IC651 as shown in table. NO
L-ch pins(16),(17),(18),(19) Check the A-H.SW.P. line between pin
Is there a signal at pin(11) of IC201? Replace IC201.
NO
R-ch pins(35),(34),(33),(32) YES (27) IC651 and pin(28) of IC701.
YES Is there audio signal inputted at pin(62) Check line between pin (11) of IC201 and
Replace IC651. IC651? pin (62) of IC651.
|
|
|
> |
|
