|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
;
Dear Sir,
Document is original service document of sharp. I had a problem with the door contacts. Fuses where blown. With the manual in a few minuts is was clear what the problem was.
Manual was of great help.
With kind regards,
Martie Verhoeven
The Netherlands.
NO.21 FLOW CHART NO.22
Playback Although picture played back, color does not appear (E-E mode is possible).
NO FM signal (approx. 0.4 Vp-p) between pins(79) and Is voltage 5V applied to chroma Check the periphery pin(61) of YES
input to the pin(78) (78) IC201. power terminal pin(61) of IC201? IC201 and YC 5V line.
Is luminance signal (approx. 0.4 NO Check between the pin(60) and Is chroma signal (approx. 403 Vp-p) input to the pin(79) IC201? mVp-p/Burst) input into the pin(46) of IC201. (Check C512.)
NO pin(46) of IC201? YES YES Is V-H.SW.P. applied to Check whether the pin(71) and pin(73)
pin(81) IC201? of IC201 oscillate (3.58 MHz)?
NO
V-H.SW.P. line. Check between the pin(58) and pin(35)
NO
Is chroma signal (approx. 508 of IC201. (Check R505, C515.) mVp-p/Burst) input into the
pin(58) of IC201? YES
NO YES YES 286 Is chroma signal (approx. 508 NO NO Vp-p) input to the IC201? pin(19) of IC201. (Check C206.)
Is luminance signal (approx. 0.25 Check the periphery of pins(13), Vp-p) input output to the pins(13), (14) and (16) of IC201. (Check (14) and (16) of IC201, respectively? C203, R201-2, L201, C205, R203.)
YES input into mVp-p/Burst) output to the
Is luminance signal (approx. 0.5 Check between the pin(18) and
pin(35) pin(54) of IC201?
NO NO pin(54) of IC201. (Check C514.) Is luminance signal (approx. 0.5 Check between the pin(21) and
47
NO Is luminance signal (approx. 0.5 Check between the pin(39) and
YES Check between the pin(55) and
Vp-p) input to the IC201? pin(42) of IC201. (Check C208.)
YES Replace IC201.
Vp-p) input to the IC201? pin(26) of IC201. (Check C212.)
YES
Is luminance signal (approx. 0.5 Vp-p) input to the pin(39) of IC201?
NO
Is voltage 5V applied to the CCD section power terminal pin(36) of IC201?
YES
control voltage approx. 5V applied normally to pin(37) from the pin(57) of IC201? Is CCD clock signal (approx. 7.16 MHz/0.5 Vp-p) applied to pin(44) from the pin(69) of IC201?
NO Vp-p) input to the pin(23) of IC201?
Is luminance signal (approx. 0.5 Check between the pins(24) and (23) of IC201. (Check C210.)
YES
Replace IC201.
VC-A400U VC-H800U
|
|
|
> |
|
