|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
 ;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
 ;
complete part-lists and pcb layout, schematic diagram is good enlargable,
 ;
Excellent, fast delivery, excellent product. Good luck!
 ;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
NO.22 Hi-Fi TROUBLESHOOTING(2) (Hi-Fi Models) FLOW CHART NO.24 LINEAR SOUND MODE TROUBLESHOOTING (1)
VC-A310X/NZ VC-H725X VC-H730X/NZ
No linear sound recording (E-E mode is possible) No Hi-Fi sound recording(E-E mode is possible)
NO Check the AUDIO MUTE (H) line between pin
Is there "L" level at pin (99) of IC201? (99) IC201 and pin (81) of IC701.
NO Replace IC651. YES
Check peripheral circuit of IC651 as YES shown in table. Is there a signal at pin(4) of IC201? Replace IC201.
L-ch pins(16),(17),(18),(19)
R-ch pins(35),(34),(33),(32) NO
Is the supply voltage 12V fed to pin(2) of Check PC 12V line.
YES YES
YES T601? Check Hi-Fi 5V line.
NO
Is there signal (Bias) at pin (5) of T601? Q603) and FE BIAS CTL line.
of IC651?
NO Is there signal (Bias + Audio sig.) at pin (6)
YES of T601? NO Is the supply voltage of 5V fed to pin(25)
Check the Bias oscillation circuit(T601,Q602,
Is there REC FM signal outputted to the pins(21) (24)(ch-1)/pins(21) to (22)(ch-2)
of IC651 ? YES
YES Check peripheral circuits of T601.
Is there H level at pin(29) of IC651? Check AH-MZ harness.
YES
NO YES
Check the MH-AM harness and A/C head.
Check or replace the cylinder. Check the Hi-Fi CTL (H) line between pin (29) IC651and pin(22) of IC701.
FLOW CHART NO.25 LINEAR SOUND MODE TROUBLESHOOTING (2) YES No linear sound playback (E-E mode is possible) Check the record AGC setting resistor
R678 at pin(37) of IC651.
46
Is there a signal at pin(100) of IC201?
YES YES
Are MH-AA harness and the PB AMP. Replace IC651. NO peripheral parts normal?
FLOW CHART NO.23 Hi-Fi SOUND MODE TROUBLESHOOTING(3) (Hi-Fi Models) Clean A/C Head.
YES
No Hi-Fi sound playback(E-E mode is possible) NO Is the azimuth height of A/C head properly
adjusted?
Replace IC651. YES
YES Replace A/C head.
Readjust azimuth height. Is there playback envelope signal(about NO Is the supply voltage of 5V fed to pin(25) 300mVp-p) outputted to the pins(29),(30) of IC651? NO
of IC651? A-H.SW.P. signal pin(27) Is there "L" level at pin (99) of IC201? YES (99) IC201 and pin (81) of IC701. IC651?
NO
Check the AUDIO MUTE (H) line between pin
YES Check peripheral circuit of IC651 as shown in table. NO
L-ch pins(16),(17),(18),(19) Check the A-H.SW.P. line between pin
Is there a signal at pin(11) of IC201? Replace IC201.
NO
R-ch pins(35),(34),(33),(32) YES (27) IC651 and pin(28) of IC701.
YES Is there audio signal inputted at pin(62) Check line between pin (11) of IC201 and
Replace IC651. IC651? pin (62) of IC651.
|
|
 |
> |
|