|
Who's Online
There currently are 5121 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Complete original Service Manual in good (scan) quality!
;
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
;
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
Best regards.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
NO.21 FLOW CHART NO.22
Playback Although picture played back, color does not appear (E-E mode is possible).
NO FM signal (approx. 0.4 Vp-p) between pins(79) and Is voltage 5V applied to chroma Check the periphery pin(61) of YES
input to the pin(78) (78) IC201. power terminal pin(61) of IC201? IC201 and YC 5V line.
Is luminance signal (approx. 0.4 NO Check between the pin(60) and Is chroma signal (approx. 403 Vp-p) input to the pin(79) IC201? mVp-p/Burst) input into the pin(46) of IC201. (Check C512.)
NO pin(46) of IC201? YES YES Is V-H.SW.P. applied to Check whether the pin(71) and pin(73)
pin(81) IC201? of IC201 oscillate (3.58 MHz)?
NO
V-H.SW.P. line. Check between the pin(58) and pin(35)
NO
Is chroma signal (approx. 508 of IC201. (Check R505, C515.) mVp-p/Burst) input into the
pin(58) of IC201? YES
NO YES YES 286 Is chroma signal (approx. 508 NO NO Vp-p) input to the IC201? pin(19) of IC201. (Check C206.)
Is luminance signal (approx. 0.25 Check the periphery of pins(13), Vp-p) input output to the pins(13), (14) and (16) of IC201. (Check (14) and (16) of IC201, respectively? C203, R201-2, L201, C205, R203.)
YES input into mVp-p/Burst) output to the
Is luminance signal (approx. 0.5 Check between the pin(18) and
pin(35) pin(54) of IC201?
NO NO pin(54) of IC201. (Check C514.) Is luminance signal (approx. 0.5 Check between the pin(21) and
47
NO Is luminance signal (approx. 0.5 Check between the pin(39) and
YES Check between the pin(55) and
Vp-p) input to the IC201? pin(42) of IC201. (Check C208.)
YES Replace IC201.
Vp-p) input to the IC201? pin(26) of IC201. (Check C212.)
YES
Is luminance signal (approx. 0.5 Vp-p) input to the pin(39) of IC201?
NO
Is voltage 5V applied to the CCD section power terminal pin(36) of IC201?
YES
control voltage approx. 5V applied normally to pin(37) from the pin(57) of IC201? Is CCD clock signal (approx. 7.16 MHz/0.5 Vp-p) applied to pin(44) from the pin(69) of IC201?
NO Vp-p) input to the pin(23) of IC201?
Is luminance signal (approx. 0.5 Check between the pins(24) and (23) of IC201. (Check C210.)
YES
Replace IC201.
VC-A400U VC-H800U
|
|
|
> |
|