|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I'm so glad I was able to find a site to download my missing manuals. Very reasonable prices and they kept me informed about the process and I had my manual within less than a day. The only thing I wish was an option is a 100% English version with no spanish or anything. But overall great site.
;
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
 ;
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
1. Press the
STANDBY button to ensure your VCR is in the STANDBY mode.
2. Press and hold the
button located on VCR front panel for 3 seconds. The VCR will search and display an ideal channel. Wait for the flashing channel number to appear on the VCR display. Example
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer to RF through ON/OFF below.
3. Switch on the TV.
4. Select the next available or unused channel on your TV, this will become the dedicated
video channel. Example of TV channels
1 = BBC1 2 = BBC2 3 = ITV 4 = Channel 4 5 = Channel 5 ? = VCR
5. Tune the selected channel on your TV until the screen below appears.
MENU SCREEN
ME NU V I D EOP L U S T I ME R MOD E SE T UP
(Blue background with white text)
SET
: SE L ECT : ENT ER
ME NU : E X I T
Store this as your VCR channel. (Refer to your TV manual for instructions on how to tune in your TV).
6. Press the NOTES:
�
button to place the VCR back into STANDBY. (The MENU screen will not be displayed when the VCR is in STANDBY mode.) If you have a preferred channel, the RF channel can be set manually (21-69) after Step 2 using [ / ] keys. If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR can be turned OFF and ON by pressing the CLEAR button then SET to return to STANDBY at point 2. This will help minimise interference. If problems persist contact the SHARP Helpline on tel: 0990-274277
5
RF THROUGH ON/OFF:
�
|
|
|
> |
|
