|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
NO.14 DRUM MOTOR TROUBLESHOOTING(1) FLOW CHART NO.16 HEAD SWITCHING PULSE TROUBLESHOOTING.
The drum motor fails to run. No head switching pulse.
Is the voltage more than about 2.6V DC fed NO See FLOW CHART NO.14, 15 NO Is the drum motor rotating?
(DRUM MOTOR
NO PG and drum FG signal Is the voltage about 5V fed to pin(7) of
Check IC701.
YES
to pin(31) of IC701? TROUBLESHOOTING(1), (2))
Check PC 5V line. YES properlypresent on pins(66) and (65) of Replace IC701. SC701 connector? IC701, respectively?
NO NO
YES
Is Check line between pin(7) of SC701 the voltage more than about 2.6V DC fed D-FG connector and pin(33) of IC701. to pin(1) of SC701 connector?
YES NO Is the voltage 12V fed to pin(4) of AD
Check PC 12V line. connector?
D-PG
YES
YES Are there drum PG FG signals at pins Check line between pins(3) and (5) of SC701
Replace drum motor.
(3) (5) SC701 connector, respectively? connector pins(66) and (65) of IC701.
NO
Check line between SC701 connector and FLOW CHART NO.15 DRUM MOTOR TROUBLESHOOTING(2) drum motor.
47
Check drum motor.
NO Check line between pin(5) of SC701 NO Is drum FG signal fed to pin(3) of SC701 NO Check line between pin(3) of SC701
The drum motor runs only for a few seconds.
Is drum PG signal fed to pin(5) of SC701 NO connector?
YES
Is drum PG signal fed to pin(66) of IC701? connector and pin(66) of IC701.
YES
Check drum motor. connector?
YES
Is drum FG signal fed to pin(65) of IC701? connector and pin(65) of IC701.
YES
Is head switching pulse sent out from the pin(23) of IC701?
YES
VC-S101U
Replace IC701.
|
|
|
> |
|
