Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Text excerpt from page 23 (click to view)
5-2. Precautions for Handling the Drive
In performing a repair, observe the following precautions.
1 Do not turn the power switch on until the palmrest and the keyboard are installed completely. 1
2 If the power switch is to be turned on with the set in disassembled state, be sure to load a dummy disc in the drive. 2
Keyboard
Palmrest
3 If the power switch is to be turned on with the set in disassembled state for checking the drive condition, be sure to turn the power switch on with the tray drawn out. 3