I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Text excerpt from page 42 (click to view)
MECHANISM TROUBLESHOOTING GUIDE
1.Deck Mechanism
A.
No Auto Rewind operates.
YES
Is output of the end sensor �H�? �H�: 3.5V or less �L�: 0.7V �1V or less
YES
NO
Is the end sensor Vcc applied at 5V?
NO
Check the Syscon power supply.
YES
Replace the end sensor.
Is voltage at both ends of the IR LED 0.8V-1.5?
NO
Replace the LED.
YES
Is the Syscon checked?
B.
No F/R operates.
YES
Is the current mode an F/R mode?
NO
Check the assembly position of the Mode S/W.
YES NO
Does the Capstan motor rotate? Is normal voltage applied at the Vcc1 and the Vcc2 of the Capstan motor?
YES
Does the T/up and the supply reel Operate?
YES
Is the Vctl terminal voltage of the Capstan Motor applied at more than 4V?