|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Perfect quality. Was able to fix speed drifting on my Sansui Turntable using the service manual instructions for PLL adjustment.
;
I am very happy regarding the online purchase of this manual from Owner-Manuals.com as with this I could set right my Denon CD player and Amplifier.
I once again sincerely thank them for the prompt service which was rendered to me.
N. Shanker
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
2-1-3. Removal of CN-1620 Board
1. Remove the two screws a (P2 x 12) and b (P2.6 x 8), and remove the camera cover (R). 2. Disconnect the four connectors (CN31, CN32, CN33, CN34) on the CN-1620 board. 3. Remove the two screws c (P2 x 6), and remove the CN-1620 board.
Screw c (P2 x 6) CN34 CN33 Claws CN31 Screw c (P2 x 6) CN32 CN-1620 board Claws Screws b (P2.6 x 8) Screw a (P2 x 12)
2-1-5. Removal of PS-515 Board
1. Remove the cover assembly. (Refer to section 2-1-1.) 2. Remove the AC-193 board. (Refer to section 2-1-2.) 3. Disconnect the five connectors (CN12, CN13, CN14, CN15 and CN16) on the PS-515 board, and remove the PS-515 board. 4. Remove the four screws (P3 x 4), and remove the PS515 board.
Screw (P3 x 4) CN13 CN14 Screw (P3 x 4) CN15 CN12 Screw (P3 x 4)
PS-515 board CN16 Screw (P3 x 4)
Screw a (P2 x 12)
Camera cover (R)
2-1-4. Removal of CN-1621 Board
1. Remove the cover assembly. (Refer to section 2-1-1.) 2. Disconnect the connector (CN53) on the CN-1621 Board. 3. Remove the two screws (P3 x 12), and remove the CN1621 board.
CN53 CN-1621 board
Screws (P3 x 12)
2-2
VID-P50
|
|
|
> |
|
