|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
EXTERNAL DEGAUSS
Make sure you disable the Bottom-right, Top-right, Top-left, Bottom-left, and rrc settings before performing the external degauss. Follow the procedure below depending on the adjustment mode you are in.
PROCEDURE o USER MODE
1) Select Degauss and press the MENU Button so that the Bottom-right, Top-right, Top-left and Bottomleft will be disabled. 2) Degauss the entire screen with degausser while the Degauss is activated (approx. 6 seconds).
n FACTORY MODE
1) Select CRT Check and press the MENU Button so that the Bottom-right, Top-right, Top-left, Bottom-left, and rrc will be disabled. 2) Confirm that the OSD stays displayed on the screen. Note: If the OSD disappears, restart from 1). 3) Degauss the entire screen with degausser.
-3-
|
|
|
> |
|
