|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
 ;
High quality scan of original Service Manual. Everything´s fine!
;
Good scan of the original service manual. All schematics and adjustment procedures are there. It helped me to fix a long lasting problem with the tracking circuitry. The manual also includes the supplementals 1,2 and 3. Included are; electrical schematic's , pcb layout's, mechanical drawing's and exploded views, disassembly manual and maintenance procedures. 236 pages.
;
The Service Manual received was helpful. The electronic information is exactly what I needed.
I recomend all of my friends about this technical page.
VL-AH150U VL-AH160U
Claw C Claw B View E Claw A Claw D View F
Note: When fixing the cassette compartment lid, first engage the claws A and B, and then engage the claws C and D, verify that the four claws (A, B, C and D) of the cassette compartment lid are securely engaged as shown in the view above. <11. Disassembly of the LCD panel>
(2)
(1)
Claw (A) Reflection sheet Light guide plate Diffusion sheet Lugs Prism sheet Lugs
Claw (A)
(3) Claw (B) Disengage the claw, and remove the LCD panel. (C) (2)
(4) FPC
Arm(E)
Arm(D)
1. Disengage two claws (A), and remove the lamp inverter unit (1) from the LCD holder (2). 2. Remove the sheets from the LCD holder (2). 3. Pull the LCD glass retaining (3). 4. Remove the FPC from Arm(D) and (E). 5. Disengage the claw (B), and slide the LCD panel (4) in the (C) direction to remove the LCD holder (2). Note: When handling the prism sheet, diffusion sheet, light guide plate and, reflection sheet do not touch any parts other than lugs and sides. Put the light guide plate and reflection sheet between reflectors of lamp. Therefore, install them together with the lamp ass'y.
11
|
|
|
> |
|
