PANASONIC VLGM201A
Owner's Manual

Using the Unit {PUSH} mode (Push to talk mode)

1 2 3

When a call is received from the door station, press {TALK}. Speak to the visitor. To end the conversation, press {TALK}. L The display will turn off.

{AUTO} mode (Auto talk mode)
This mode allows you to answer the call by voice. Speak a brief reply into (or toward) the monitor station, such as �Yes?� or �Hello?�. This reply is used to start {AUTO} mode; the visitor will not hear your reply. The monitor station will beep to indicate {AUTO} mode has started and you may then speak to the visitor.

1 2 3

When a call is received from the door station, answer �Yes?� within 30 seconds. L A beep will sound to indicate that you can talk to the visitor (hands-free conversation). Speak to the visitor. To end the conversation, press {TALK}.

Note: L Make sure you are within about 50 cm (20 inches) of the monitor station. L You can also answer the call by pressing {TALK}. L Your initial reply should be brief (less than 1 second), otherwise {AUTO} mode will not start. L If a visitor calls you, a loud, brief sound (such as a barking dog) may start {AUTO} mode even though you have not replied by voice.

{HOLD} mode (Hold to talk mode)

1 2 3 4

When a call is received from the door station, press and hold {TALK} to speak to the caller. L A beep will sound and the Talk indicator will light. To listen to the visitor, release {TALK}. L The Talk indicator will turn off. To speak again, press and hold {TALK}. To end the conversation, tap {TALK}.

Note: L Make sure you speak to the caller only while pressing {TALK} and release {TALK} when you have stopped speaking so that the caller can speak to you.

24