Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Text excerpt from page 28 (click to view)
Using the LCD Monitor
You can use the LCD monitor to play back recordings that you have made or to watch the subject during recording.
� You can also fold the LCD monitor into the camcorder with the screen facing out for watching playback on the monitor.
3
Power switch LCD monitor
Hold down the Lock button and set the Power switch to v or w.
� A picture displays on the LCD monitor.
Lock button
1
Open the LCD monitor to a 90° angle to the camcorder body.
Note: � Battery consumption is larger when the LCD monitor is opened. Use the viewfinder instead of the LCD monitor when you want to save the battery power.
Closing the LCD monitor
90�
Return the LCD monitor to the vertical 90° position with the screen facing in, and fold it into the camcorder into place.
Notes: � Do not use excessive force when moving the LCD monitor. � When closing the LCD monitor, do not tilt it; otherwise the monitor may not close properly and may become damaged. � Do not pick up the camcorder by the LCD monitor. � Do not place the camcorder with the LCD monitor screen facing down. � Close the LCD monitor completely with the screen facing in when not in use. � Before closing the LCD monitor, make sure the battery pack is properly attached to the camcorder, otherwise the monitor may be damaged.
2
Adjust the LCD monitor to an angle that allow easy viewing of the onscreen picture.
� The LCD monitor rotates 270° vertically.
Preparation
180
90
Note: Do not try to rotate the LCD monitor vertically until the monitor is completely opened.
