Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
Text excerpt from page 51 (click to view)
Self recording with reversed grip
Available mode: Tape Camera
3
Open the LCD monitor to a 90° angle to the camcorder body (1), and then rotate it 180° vertically (2).
90�
Rotate the grip 90° and the LCD monitor 180° vertically so that you can record yourself while holding the grip.
180�
4 5 6 1
Turn the camcorder downward as shown below.
Set the Media Selection switch to V. Set the Power switch to v. Begin recording.
2
Rotate the lens section 90° vertically as shown below.
Notes: � Do not rotate the monitor section to the self recording position during recording or playback. � During self recording, the mode or menu screen cannot be displayed. � All of the manual settings are set to AUTO and some other settings will set to OFF in self recording. � You may experience image noise when using self recording. � To operate self recording with reversed grip correctly, make sure to turn the grip and the lens section so that the Start/Stop button and the tripod socket face upward, and the lens faces toward you. The I indicator will appear. � Be sure that the LCD monitor rotation is exactly 180°, otherwise the image recorded will be rotated 180° upside-down. � In self recording with reversed grip in Card Camera mode, the still images will be recorded rotated 180° upside down. The J indicator will appear in this case. � The viewfinder does not work in self recording with reversed grip.