|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
;
The manual is of better quality compared to other. I found it less expensive and therefore it it is the best buy cost vs quality.
 ;
I bought the service-manual of the sony ICB-1020(an old transmitter-receiver) at "www.Owners-Manual.com", I found the service-manual for a fairly cheap price(in comparison with other sellers). I filled in some questions, payed the order with Ideal, and within 24 hours I had my service manual. I was very happy:In no time I had my service-manual and everything, but literally everything was noted down in the manual; the electronic scheme, the parts list, etcetera.
A very practical, reference-document.
;
This comprehesive service maual was greatly appreciated, as was the digital download.
;
Good en helpfull black and white scanned Srfvice manual of the Philps D8444. Quick service and delivery
Alignment and adjustment
5. AUTO IRIS 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect video(output) jack to waveform monitor input jack and monitor TV jack respectively. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CE IRISA XX XX�. 5) Press �START/STOP(confirm)� Bttom.100IRE. 6) Then, the micro process of will work; - IRIS open, IRIS control minimum Value found. - IRIS close, IRIS control minimum Value found. - Store the data to mode 84 and mode 85. 7) The OSD shows �O.K�.
6. Auto white balance 1) Camera �E-E�, 3100¡K/5100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 4) Connect vectorscope input jack to video(output) jack. 3) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CF WBA XX XX�. a. W/B Indoor a-1. Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) a-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. a-3. The OSD shows �OK!�. b. W/B Outdoor b-1. Aim the camera at a 5100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) b-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. b-3. The OSD shows �OK!�.
Match the white luminance point with the black luminance point
Center of white level
H
100IRE
Optical black level
40US
7. Pre white balance (I) 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect vectorscope input jack to video(output) jack. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �1C CWBR XX XX�. 5) Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. 6) Adjust the � + (DATA UP)/ - (DATA DOWN)� button so that the white vector moves to the B-Y axial on screen of the vectorscope. 7) The OSD shows �OK!�. Samsung Electronics
Match the white luminance point with the black luminance point
5-15
|
|
|
> |
|
