|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
 ;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
Alignment and adjustment
5. AUTO IRIS 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect video(output) jack to waveform monitor input jack and monitor TV jack respectively. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CE IRISA XX XX�. 5) Press �START/STOP(confirm)� Bttom.100IRE. 6) Then, the micro process of will work; - IRIS open, IRIS control minimum Value found. - IRIS close, IRIS control minimum Value found. - Store the data to mode 84 and mode 85. 7) The OSD shows �O.K�.
6. Auto white balance 1) Camera �E-E�, 3100¡K/5100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 4) Connect vectorscope input jack to video(output) jack. 3) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �CF WBA XX XX�. a. W/B Indoor a-1. Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) a-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. a-3. The OSD shows �OK!�. b. W/B Outdoor b-1. Aim the camera at a 5100¡K gray-scale chart illuminated at 1500 to 2000 lx. (40us) b-2. Press �START/STOP (CONFIRM)� button so that the white vector moves to the center on screen of the vectorscope. b-3. The OSD shows �OK!�.
Match the white luminance point with the black luminance point
Center of white level
H
100IRE
Optical black level
40US
7. Pre white balance (I) 1) Camera �E-E�, 3100¡K gray-scale chart. 2) Video(output) jack and AF MICOM. 3) Connect vectorscope input jack to video(output) jack. 4) Press the �BLC (MODE UP)/FADE (MODE DOWN)� button so that the OSD state is �1C CWBR XX XX�. 5) Aim the camera at a 3100¡K gray-scale chart illuminated at 1500 to 2000 lx. 6) Adjust the � + (DATA UP)/ - (DATA DOWN)� button so that the white vector moves to the B-Y axial on screen of the vectorscope. 7) The OSD shows �OK!�. Samsung Electronics
Match the white luminance point with the black luminance point
5-15
|
|
|
> |
|
