|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
again you did a very good job. It was fast too. Photocopy are really readable and clear
 ;
Probably it never existed a 1081 official service manual from Commodore, it's look more like a NAPCEC service manual & diagrams compilation of the 1084 series and his variants, like the nap6523, 8cm505, 1084S, 1084P and obviously the 1081. It's more complete than other scans and the quality of the scans also are far superior. It has two circuit diagrams variants of the 1081, mono and stereo versions. It doesn't include a diagram for the Philips CM8500 or CM8501, they look like the 1081 but they are slightly different.
;
Rapid, clear well done as all the scheme I downloaded from this site. Great job very functional and very useful
;
Great copy of the manual, has all information required for servicing,
;
I work at an authorized service center and I can tell if a manual is as it should be. This one is. It may be a scan, but a very good one at that. The interesting part for me was the curcuit diagram which was scanned at high quality, making it as good as the original. I will definitely be back as a customer. I need not say this, but I will: the price was the best. Thank you owner-manuals.com .
Alignment and Adjustments
2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value. Press the �ENTER� (Confirm) to store the adjusted value.
CAMERA OCD
EPR EVR XX XX Adjusted values Stored values
Fig. 2-3
1) EEPROM Data Initialize
Caution : This adjustment must do following items changing new EEPROM (IC705) or Main PCB. � Press the �EASY�(Mode Up)/�DISPLAY�(Mode Down) buttons so that OSD shows �ODF XX XX�. ´ Using �MENU Dial�(Data Up/Down) so that display data of EVR is �A0� � Press the �ENTER� (Confirm). ¨ The OSD shows �OK� after huithing the initalize.
2) Lens Zoom Track
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on the location of Zoom Lens. During adjusting, micom measures the focus location from a near distance to a long. � Camera is set to E-E mode. ´ Focus chart photo. � Ensure that camera is left an about 3m distance from a focus chart and the focus of lens is placed vertically. Attach a focus chart to white or gray wall of a flat surface. ¨ Connect a video output terminal to a TV. � Press the �EASY�(Mode Up)/�DISPLAY�(Mode Down) buttons so that OSD shows "ODE XX XX". � Press the �ENTER� (Confirm). Never impact on the lens when adjusting zoom and focus Lens. The OSD shows �OK� after finishing the adjustment. 3M ± 1cm (Be sure to maintain the distance)
LENS
CCD
Fig. 2-4 Samsung Electronics 2-3
|
|
|
> |
|
