|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
ENGLISH
Maintenance
After finishing a recording
� At the end of a recording you must remove the power source. � When recording with a Lithium Ion Battery Pack, leaving the pack on the camcorder can reduce the life span of the battery. Hence, it should be removed from the camcorder. � �
1. 1. Slide the TAPE OPEN/EJECT switch in the direction of the arrow. s Opening the cassette door ejects the tape automatically. s Please wait while the tape is completely ejected.
TAPE OPEN/EJECT
s s
/
1
2
2.
3
s
2. After removing the tape, close the door and store the camcorder in a dust free environment. s Dust and other foreign materials can cause square-shaped noise or jerky images. 3. Set the power switch to the OFF mode. 4. Disconnect the power source or remove the Lithium Ion Battery Pack. s Hold down the BATTERY RELEASE button and slide the battery pack in the direction of the arrow.
3. 4.
s
OFF
BATTERY RELEASE
99
|
