|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
Adjustment
3-2-2 Camera Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value. Press the START/STOP (Confirm) button to store the adjusted value.
80
XX
XX
(Adjusted value)(Stored value)
1. LENS ZOOM TRACK
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on the location of zoom lens. During adjusting, micom measures the focus location from a near distance to a long. 1) Camera is set to E-E mode. 2) Focus chart photo (the last page of manual) 3) Ensure that camera is left an about 3 m distance from a focus chart and the focus of lens is placed vertically. Attach a focus chart to white or gray wall of a flat surface. 4) Connect a video output terminal to a TV. 5) Press the FF(Mode Up)/REW(Mode Down) button so that OSD shows "C8 XX XX". 6) Press the Display button so that OSD shows "C8 XX XX". 7) Press the START/STOP (Confirm) button. Never impact on the lens when adjusting zoom and focus lens. There's is a flicker on screen after finishing the adjustment.
3-16
Samsung Electronics
|
|
|
> |
|
