|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It has all the information you will need to fix it. The main circuit diagram is only A4 but being a PDF, you can print it to any size - I did it on two sheets of A3 and it didnt lose any detail - just made it readable when pinned up above the bench. I've found the fault, just need to buy some obscure bits to get it going again!
I cant fault the process, I paid for the manual in the morning and it was ready to download by lunch time.
 ;
Very good copy in a 54 pages PDF archive. This is my sixth purchase here. :)
;
Another excellent buy! File too clear and explanatory.
;
A manual hard to find. It was very helpful to restore my device.
;
I am very grateful for this manual. Without it could not repair my receiver.
Alignment and Adjustment
4-2-2 Camera System Adjustment
Note : The on-screen display information. �XX XX� means arbitrary value. It can be different number depend on the conditions. 0DF T.INI XX XX
1. Focus to zoom tracking Notes : To maintain proper focus throughout the zoom range, the focus lens position must be changed as the zoom lens is moved. During this adjustment the microprocessor will measure the focus positioning requirements at the wide and telephoto position of the zoom lens. 1) Camera �E-E�. 2) Focus chart (Attached on the last page of this manual). 3) Aim the camera at the focus chart placed 3 meters away and perpendicular to the center of the lens. The chart should be placed on the flat, gray or white wall. 4) Connect monitor TV jack to video output jack. 5) Press the �FADE(MODE UP)� and �BLC(MODE DOWN)� button, so that the OSD start is �0DE. 3M LENS XX XX�. 6) Press �MENU ON/OFF(CONFIRM)� button. The camera will move both zoom and focus lens. The adjustment is finished when the O.K! message appears on the TV screen. Store the data to mode 0A6, 0A7, 0A8, 0A9, 0AA, 0AB, 0AC or 0AD.
(3M±1cm) (Be sure to maintain the distance.)
LENS
CCD
4-22
Samsung Electronics
|
|
|
> |
|
