|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
Connecting cables with a SCART socket
Connecting cables without a SCART socket
1 Remove the aerial cable plug from your TV set and insert
1 Remove the aerial cable plug from your TV set and insert
it into the
2
socket at the back of the video recorder.
3
it into the
2
socket at the back of the video recorder.
3
2 Plug one end of the aerial cable provided into the
2 Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the plug of a scart cable into the scart socket
socket on the video recorder and the other end into the aerial input socket on your TV set.
3 Insert the female plug of the mains cable into the mains
at the back of your video recorder. Connect the other plug to the TV set.
EXT.1
socket
4
at the back of the video recorder.
4 Plug the other end of the mains cable into the wall
socket.
5 Switch on your TV set and select the programme number
that you have earmarked for video playback. (see operating manual for your TV set).
4 Insert the female plug of the mains cable into the mains
socket
4
at the back of the video recorder.
6 Ensure that no cassette has been inserted. With the video
5 Plug the other end of the mains cable into the wall
socket.
recorder switched off, hold the SYSTEM button for a few seconds until a modulator frequency e.g.: �M583� (UHF-channel 35) appears in the display. The video recorder transmits a test picture.
7 Tune in the TV set in the UHF wave band until this picture
appears.
MODULATOR
583
------------------------/+ ON/OFF gCL OK
8 Switch off the video recorder with the
STANDBY m
but-
ton.
3
|
|
|
> |
|
