|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good copy, very readable and easy transaction as always.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
1.
Installing your video recorder
Connecting your video recorder to the TV set
To install your video recorder, you will need to read one of the following. E If your TV set has �Easy Link� or �NexTView� - the paragraph �Connecting with a scart cable and Easy Link or NexTView�. E If your TV set does not have �Easy Link� or �NexTView� the paragraph �Connecting with a scart cable without Easy Link or NexTView�. E If you do not use a scart cable - the paragraph �Connecting without a scart cable�.
Important for the United Kingdom
This machine is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug, please follow these instructions.
a Take off the fuse cover and take out the fuse. b Put in a new fuse which should be a BS1362 3A, A.S.T.A.
or BSI approved type.
c Refit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit another type. If the plug you fit contains a fuse, it should be a 3Amp fuse. If you fit a plug which does not need a fuse, make sure the fuse on your fuse box is not greater than 5 Amps. D Note: Please destroy the plug you have cut off so that it cannot be used in a 13 Amp socket somewhere else. How to connect a plug The wires in the lead from the video recorder are coloured as follows. * Blue - �neutral� (�N�). * Brown - �live� (�L�).
d Connect the blue wire to the terminal in the plug which is
Connecting with a scart cable and Easy link or NexTView
Easy Link and NexTView allow your video recorder to exchange information with the television. Please follow the operating instructions you received with your television.
marked with the letter �N� or coloured black.
e Connect the brown wire to the terminal in the plug which
is marked with the letter �L� or coloured red.
f Do not connect either of the wires to the terminal in the
plug which is marked with the letter �E�, the symbol \or coloured green or green and yellow. Before you refit the plug cover, make sure that the grip at the bottom of the plug is clamped over the plastic cover of the lead, not just over the two wires.
a Take the aerial cable plug out of your TV set and put it
into the
2
socket on the back of the video recorder.
b Plug one end of the aerial cable provided into the TV
socket on the video recorder. Then plug the other end into the aerial input socket on your TV set.
c Plug one end of the scart cable provided into the
scart socket on the back of the video recorder. Then plug the other end into the scart socket on your TV set.
AV1 EXT1
2
|
|
|
> |
|
