PHILIPS VRA671AT
Owner's Manual

Recording 31
Read and follow the steps below to record a television program. Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.

1 2 3 4 5

1 2 4 7

Turn on the TV. Insert a tape in the VCR.

5
POWER EJECT VCR/TV SPEED MEMORY REC/OTR PAUSE/STILL

Insert a tape with its record tab intact in the VCR.

PLAY REW F.FWD STOP

Press the VCR button.
MENU

8 9 6

STATUS/EXIT

CLEAR

If the VCR light appears on the display panel, go to step 5. If the VCR light does not appear, press the VCR/TV button once.

1 4 7
MUTE

2 5 8 0
TV

3 6 9
ALT.CH
CBL/DBS VCR PLUS+ /ENTER

CH.

Press the SPEED button until the desired tape speed appears briefly on the screen. (Details about tape speed are on page 36.)

3

VCR

VOL.

VAR.SLOW

SLOW

TRACKING

F.ADV

X2 PLAY

6
Use the CH(annel) o/p button or the Number buttons to select the channel to be recorded.

QUICK

TIME

INDEX REC END

SKIP

SEARCH

7 8

Press the REC(ord)/OTR button once to start recording. The Record light will appear.

To pause the recording, press the PAUSE/STILL button once. The Record light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The Record light will come on again.

� If you press the REC(ord)/OTR button when there is not a tape in the VCR, NO CASSETTE will flash on the screen. If you press the REC(ord)/OTR button while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. Other recording options are on pages 32-43. You can change the tape speed during a recording, but some distortion will appear on the tape. The VCR will record in a preset volume.

Helpful Hints

�

9
To stop recording, press the STOP/p button. � �

�