perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 30 (click to view)
VRZ364/VRZ344
4/7/99 8:10 PM
Page 30
30 Recording
Read and follow the steps below to record a television program.
1 2 3 4
Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.
1 2 4 5
Turn on the TV. Insert a tape.
Insert a tape with its record tab intact (details are on page 5) in the VCR. The power will come on.
CBL/DBS
TV
VCR
VCR/TV
Press the VCR button.
QUICK PROGRAMMING POWER
EJECT c
3 6 8
1 7 4
+ �
2 8 5 0
+ �
3 9 6
START
STOP
DATE
DBS
DAILY STILL/SLOW
WEEKLY
If the VCR light appears on the display panel of the VCR, go to step 5. If the VCR light does not appear, press the VCR/TV button once.
SPEED
CLEAR
�
REW ;;
+
:: FF
5
Press the SPEED button until the desired tape speed appears on-screen. The VCR will only record in SP or SLP. Details about tape speed are on pages 38 and 52.
PLAY :
9
VOL SKIP JOG/SHTL
STOP L MENU
/OK
CH
EXIT/STATUS
6
REC /OTR
........
6
Use the CH(annel) 8/9 buttons or the Number buttons to select the channel to be recorded.
TIMER
7;;INDEX ::7 AUDIO/MUTE
c
........
7
Press the REC(ord)/OTR button to start recording. The \ light will appear on the VCR display panel.
J
REV 2 3 FWD
7
8 9
To pause the recording (for example, during commercials), press the STILL/SLOW button on the remote control. The \ M M light will appear on the display panel. To resume recording, press the STILL/SLOW button again. The \ light will appear on the display panel.
Helpful Hints
� If the REC(ord)/OTR button is pressed while a tape without a record tab is in the VCR, PROTECTED CASSETTE CANNOT RECORD will appear briefly on screen. The VCR will eject the tape. � The VCR records in a preset volume. � If the end of the tape is reached while recording, the VCR will stop recording, rewind the tape, then stop. Details are on page 51.
Press the STOP 9 button to stop recording. The \ light will disappear from the display panel.
