|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
;
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
;
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
;
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
Chapter 6 Mixer Channel Strip Detail
Low This adjusts the gain (-12 dB to +12 dB) and the shelving frequency (40 Hz-1.5 kHz) of the low-band EQ. Mid This adjusts the gain (-12 dB to +12 dB) and the center frequency (200 Hz-8 kHz), and the Q (filter sharpness) (0.516) of the mid-band EQ. The Mid band is not available when �2 Band EQ� is selected. High This adjusts the gain (-12 dB to +12 dB) and the shelving frequency (500 Hz-18 kHz) of the high-band EQ. ENTER Button When the cursor is positioned inside the EQ section, the ENTER button will be blinking. Press [ENTER] to view a graphic display of the EQ settings.
[F2 (FX2)] Effect 2 Send
Channel settings for the EFFECT 2 Bus. Sets the Effect Send Switch, the Send Level (0-127) and panning. Sw (Effect Send Switch) Switches the channel to the EFFECT bus. Off: The channel is not sent to the EFFECT bus. Pre: The signal is sent to the EFFECT bus before it passes through the mixer fader. Post: The signal is sent to the EFFECT bus after it passes through the mixer fader. Level Sets the channel�s send level (0-127) to the EFFECT 2 Bus. Panning Sets the channel�s panning (L63-R63) in the EFFECT 2 Bus.
[F5 (V.Trk)] V-Track Select
Selects the V-Track (1-16) for playback or recording. The V-Track setting is only available in the Track Mixer. The VS-1824 must be stopped before this value can be changed. A small box indicates that a recording has been made on the V-Track. A flat line indicates the V-Track has not yet been recorded.
[F3 (FX3)] Effect 3 Send
Channel settings for the EFFECT 3 Bus. Sets the Effect Send Switch, the Send Level (0-127) and panning. Sw (Effect Send Switch) Switches the channel to the EFFECT bus. Off: The channel is not sent to the EFFECT bus. Pre: The signal is sent to the EFFECT bus before it passes through the mixer fader. Post: The signal is sent to the EFFECT bus after it passes through the mixer fader. Level Sets the channel�s send level (0-127) to the EFFECT 3 Bus. Panning Sets the panning (L63-R63) of the channel to the EFFECT 3 Bus.
Chapter 6
[F6 (PRM.V)] Parameter View/ [F6 (CH.V)] Channel View
Changes the display from Channel View to Parameter View. Press [F6 (PRM.V)] to view the Parameter settings (such as Pan or Effect Send) for all channels. Press [F6 (CH.V)] to view the entire mixer settings for just one channel.
[F1(FX1)] Effect 1 Send
Channel settings for the EFFECT 1 Bus. Sets the Effect Send Switch, the Send Level (0-127) and panning. Sw (Effect Send Switch) Switches the channel to the EFFECT bus. Off: The channel is not sent to the EFFECT bus. Pre: The signal is sent to the EFFECT bus before it passes through the mixer fader. Post: The signal is sent to the EFFECT bus after it passes through the mixer fader. Level Sets the channel�s send level (0-127)to the EFFECT 1 Bus. Panning Sets the channel�s panning (L63-R63) in the EFFECT 1 Bus.
91
|
|
|
> |
|
