|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very complete shop manual. It contains everything needed to troubleshoot bascially any problem. Instructions, diagrams, schmeatics, illustrations... it's all there. Highly recommended!
;
Great product, very good quality, found all needed information. Thanks
;
Excellent quality, helped to fix problem. Thank you very much!!!!
;
I thank Owner-Manuals.com for providing the necessary manual very quickly, and it was very helpful in repairing my personal Audio System and I once again thank them for the wonderful customer's service satisfaction.
Thanks.
;
Everything fine: quick service, no glitch and above all a very good quality of the Pdf file. Thank you!
5
6
7
8
A
K
IC401 (Pin 4) IC201 (Pin 6) Is there a LR clock ? Yes IC201 (Pin 77) BCKO Is there abnormality at the parts and patterns in the path? Yes IC401 (Pin 9) Is there a bit clock ? Yes IC401 (Pin 2) No No No Is there abnormality at the parts and patterns in the path? No Replace IC401.
Check the following points when the source is compression or DVD-A. SDTO Is there abnormality at the parts and patterns in the path?
Is there No a audio data (with Sch source)?
No
Failure in 2nd DSP block, Go to Step 9. Is there abnormality at the parts and patterns in the path?
B
Is there No a audio data (with Sch source)? Yes IC201 (Pin 5) CDTO
No Replace IC401.
Failure in 2nd DSP block, Go to Step 9.
Is there a bit clock ? Yes IC201 (Pin 7)
No
Is there abnormality at the parts and patterns in the path?
No Replace IC401. Is there No a audio data (with Cch source)? Yes IC401 (Pin 10) Is there abnormality at the parts and patterns in the path? No
C
FDTO Is there abnormality at the parts and patterns in the path?
Failure in 2nd DSP block, Go to Step 9.
Is there a audio data ? Yes IC401 (Pin 3)
No
No Is there No a audio data (with Cch source)? Yes IC201 (Pin 4) BDTO
D
Failure in 2nd DSP block, Go to Step 9.
Is there abnormality at the parts and patterns in the path?
No
Replace IC401.
Is there a audio data ? Yes
No
Is there abnormality at the parts and patterns in the path?
No Replace IC401. Is there No a audio data (with SBch source)? Yes IC401 (Pin 11) Is there abnormality at the parts and patterns in the path? No
IC401 (Pins 25,24) FLO, FRO
Failure in 2nd DSP block, Go to Step 9. Is there abnormality at the parts and patterns in the path?
Is there a analog audio output? Yes
No Check the parts and patterns (short-circuit) in the path including the DSP assy and others. No Replace IC401.
Is there No a audio data (with SBch source)? Yes
No
Replace IC401.
E
Is there a analog audio output at CN402-pins 7 and 5? Yes Is not there poor contact in CN402-pins 7 and 5? Yes
No Check the parts and patterns in the path on the DSP assy.
IC401 (Pins 22,21) SLO, SRO
Is there a analog audio output (with Sch source)? No Replace CN402. Yes
No
Check the parts and patterns (short-circuit) in the path including the DSP assy and others. No Replace IC401.
F
L
VSX-2016AV-S
5 6 7 8
127
|
|
|
> |
|
