|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High-quality scanning. Detailed description. Recommend for all technician. A+++
;
This is a good quality scan of the original Service Manual from Nordmende, Germany. Contains the circuit diagram, PCB layout, adjust/tune instructions as well. It is NOT in English but in GERMAN language! That was quite right for my german friend from the lower east side in Berlin.
 ;
Received via e-mail this PDF manual is worth the money. This is a quality scan of a manual in excellent condition and is just as good as having the original manual in hand. I have later seen the original manual and it was printed in colour, but this particular manual is black & white but scan resolution is high end quality! All drawings and pictures are presented in great detail. So, nearly perfect score in my opinion.
If you own the turntable you also should own the manual!
;
I was very satisfied with the service manual I ordered and downloaded. I will definitely buy again from this seller.
;
Great product. Recieved it fast...exactly as advertised.
5
6
7
8
A
K
IC401 (Pin 4) IC201 (Pin 6) Is there a LR clock ? Yes IC201 (Pin 77) BCKO Is there abnormality at the parts and patterns in the path? Yes IC401 (Pin 9) Is there a bit clock ? Yes IC401 (Pin 2) No No No Is there abnormality at the parts and patterns in the path? No Replace IC401.
Check the following points when the source is compression or DVD-A. SDTO Is there abnormality at the parts and patterns in the path?
Is there No a audio data (with Sch source)?
No
Failure in 2nd DSP block, Go to Step 9. Is there abnormality at the parts and patterns in the path?
B
Is there No a audio data (with Sch source)? Yes IC201 (Pin 5) CDTO
No Replace IC401.
Failure in 2nd DSP block, Go to Step 9.
Is there a bit clock ? Yes IC201 (Pin 7)
No
Is there abnormality at the parts and patterns in the path?
No Replace IC401. Is there No a audio data (with Cch source)? Yes IC401 (Pin 10) Is there abnormality at the parts and patterns in the path? No
C
FDTO Is there abnormality at the parts and patterns in the path?
Failure in 2nd DSP block, Go to Step 9.
Is there a audio data ? Yes IC401 (Pin 3)
No
No Is there No a audio data (with Cch source)? Yes IC201 (Pin 4) BDTO
D
Failure in 2nd DSP block, Go to Step 9.
Is there abnormality at the parts and patterns in the path?
No
Replace IC401.
Is there a audio data ? Yes
No
Is there abnormality at the parts and patterns in the path?
No Replace IC401. Is there No a audio data (with SBch source)? Yes IC401 (Pin 11) Is there abnormality at the parts and patterns in the path? No
IC401 (Pins 25,24) FLO, FRO
Failure in 2nd DSP block, Go to Step 9. Is there abnormality at the parts and patterns in the path?
Is there a analog audio output? Yes
No Check the parts and patterns (short-circuit) in the path including the DSP assy and others. No Replace IC401.
Is there No a audio data (with SBch source)? Yes
No
Replace IC401.
E
Is there a analog audio output at CN402-pins 7 and 5? Yes Is not there poor contact in CN402-pins 7 and 5? Yes
No Check the parts and patterns in the path on the DSP assy.
IC401 (Pins 22,21) SLO, SRO
Is there a analog audio output (with Sch source)? No Replace CN402. Yes
No
Check the parts and patterns (short-circuit) in the path including the DSP assy and others. No Replace IC401.
F
L
VSX-2016AV-S
5 6 7 8
127
|
|
|
> |
|
