|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
VSX-409RDS
8. PANEL FACILITIES AND SPECIFICATIONS
8.1 PANEL FACILITIES
12
Front Section
34 5 67 89
0
- =~
!
@
#
$
%
^&
*
(
1 MAIN POWER button
Push to send electricity to the receiver. Note the STANDBY/ ON button below actually turns the receiver on and standby.
- Remote sensor
Receives the signals fromthe remote control.
= DSP MODE button
Use to switch between the various DSP modes available (HALL, JAZZ, DANCE, THEATER1, THEATER2) and DSP off. Use to create different surround sound effects from any stereo source.
2 STANDBY indicator
Lights when the receiver is in standby mode (note that the receiver consumes a small amount of power (1W) in standby mode).
3
STANDBY/ON button
Switches the receiver between on and standby.
~ DOLBY PRO LOGIC button
Use to switch between the various Pro Logic modes (PRO LOGIC, PRO LOGIC THEATER1, PRO LOGIC THEATER2) and Pro Logic off.
4 STATION (+/�), FREQUENCY (+/�), TUNING SELECT buttons
STATION (+/�) Selects station memories when using the tuner. FREQUENCY (+/�) Selects the frequency when using the tuner. TUNING SELECT Switches between station memory and frequency select modes. Switches between the three banks (classes) of station memories.
! MASTER VOLUME
Use to set the overall listening volume.
@ PHONES jack
Connect headphones for private listening .
# SPEAKERS button
Use to switch the speaker system on or off.
5 CLASS button 6 MEMORY button
Press to memorize a station for recall using the STATION (+/�) buttons. Also use to search in RDS mode
$ FL DIMMER button
Use this button to make the fluorescent display (FL) dimmer or brighter. There are three brightness settings as well as an off setting.
% BASS (+/�) buttons
Use to increase/decrease bass (within a range of � 6dB to 6dB in 2dB steps). It cannot be used when S.BASS is on.
7 RF ATT button
Use to lower the input level of a radio signal that is too powerful or has interfering waves, thus causing the receiver to distort
^ TREBLE (+/�) buttons
Use to increase/decrease treble (within a range of � 6dB to 6 dB in 2dB steps).
8 CHARACTER/SEARCH button
Use this button to search for different program types in RDS mode. It is also used to input station names.
& Function buttons
Use to select a source for playback or recording.
* S.BASS button
Use to switch on and off the bass boost. Use for a more powerful bass sound. Negates use of BASS buttons.
9 EON MODE button
Use this button to search for different programs that are transmitting traffic or news information (this search method is called EON).
( DIRECT button
Use to switch DIRECT playback on or off. This mode bypasses all tone controls, Dolby, DSP and channel levels for the most accurate reproduction of a program source.
0 Display
49
|
|
|
> |
|
