|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The ease of this purchase was a good start. The content of this manual was exactly all I needed to retore my Tandberg 64.
All of the mechanical and electrical information is contained in the manual and the quality of the document makes reading the data easy.
The exerience with the resource has made this my prime source for technical data.
;
Owner-manuals.com is the best Possibility to give vantage HIGH CLASS Elektronic COMPONENTS
a new Life.Thanks alot for your perfekt Service.
;
I am proud of you. In the future, I benefited from your services.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
1
2
3
4
Display
A
VSX-415 model:
1
2
3
4
5
6
9
8
13 EON RDS
11
B
12 1 SIGNAL SELECT indicators Lights to indicate the type of input signal
assigned for the current component:
14
16
18
10
20
8 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 9 SLEEP Lights when the receiver is in sleep mode. 10 Tuner indicators MONO Lights when the mono mode is set using the MPX button. STEREO Lights when a stereo FM broadcast is being
received in auto stereo mode. TUNED Lights when a broadcast is being received. 11 Speaker indicator Shows if the speaker system is on or not. SP A means the speakers are switched on. SP means the headphones are connected. 12 Character display
AUTO Lights when AUTO signal select is on. SB Depending on the source, this lights when
a signal with surround back channel encoding is detected.
C
DIGITAL Lights when a digital audio signal is
detected.
2 DIGITAL Lights when a Dolby Digital encoded signal
is detected.
ANALOG Lights when an analog signal is detected. DTS
audio signals is detected.
D
Lights when a source with DTS encoded
2 When the STANDARD mode of the receiver is on, this lights to indicate decoding of a DTS
multichannel signal. 3 2 DIGITAL When the STANDARD mode of the receiver is on, this lights to indicate decoding of a Dolby Digital multichannel signal.
13 EON EON lights when the EON mode is set, and flashes during reception of an EON broadcast. The indicator lights when the current station carries the EON service. RDS Lights when an RDS broadcast is received. 14 ADV.SURR. (Advanced Surround) Lights when one of the Advanced Surround modes has been selected.
15 � � � � � � 16 MIDNIGHT Lights during Midnight listening. 17 � � � � � �
4 2 PRO LOGIC II When the (STANDARD) Pro Logic II mode of the receiver is on, 2 PRO LOGIC II lights to indicate Pro Logic II decoding.
E
F
5 VIR.SB Lights during Virtual surround back processing. 6 DIRECT Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduction of a source. 7 ������
18 LOUDNESS Lights during Loudness listening. 19 � � � � � � 20 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and - 0 dB indicates the maximum level.
Depending on your level settings for each channel, the maximum volume can range between �10 dB and �0 dB.
74
1 2
VSX-415-K
3 4
|
|
|
> |
|
